From: Nigel.Johnson@barclayscapital.com
Date: Mon Jun 21 2004 - 07:13:37 GMT-3
When using the 'dlsw icanreach' command together with the 'dlsw icanreach
mac-exclusive', is it possible to specify multiple mac addresses? The
command reference (
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fibm
_r1/br1fprt2/br1fdlsw.htm#wp1017857
<http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fib
m_r1/br1fprt2/br1fdlsw.htm#wp1017857> ) seems to imply that it's ok but
I've not come across an example.
e.g. Is this valid:
dlsw icanreach mac-address 0000.1010.a0a0
dlsw icanreach mac-address 0000.2020.b0b0
dlsw icanreach mac-exclusive
Also, would this be fine with the equivalent commands for netbios names?
Cheers,
Nigel
------------------------------------------------------------------------
For more information about Barclays Capital, please
visit our web site at http://www.barcap.com.
Internet communications are not secure and therefore the Barclays
Group does not accept legal responsibility for the contents of this
message. Although the Barclays Group operates anti-virus programmes,
it does not accept responsibility for any damage whatsoever that is
caused by viruses being passed. Any views or opinions presented are
solely those of the author and do not necessarily represent those of the
Barclays Group. Replies to this email may be monitored by the Barclays
Group for operational or business reasons.
------------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:45 GMT-3