Re: Traffic Priority

From: Ty (tycampbell@comcast.net)
Date: Sat Jun 12 2004 - 23:13:05 GMT-3

• Next message: Richard Dumoulin: "RE: sparse-mode and auto-rp"
• Previous message: Richard Dumoulin: "RE: Even routes but only first 30 networks..."
• Maybe in reply to: rexperts: "Traffic Priority"
• Next in thread: Richard Dumoulin: "RE: Traffic Priority"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

rsvp is done on the interface with "ip rsvp bandwidth" and you can specify
the parameters that you want after that. This should be applied to all
routers in the path that your voice traffic is taking

CBWFQ is a little more difficult, but here is an example from a lab I was
working on this evening:
(irrelevant parts omitted) you may have to change things, depends on your
setup..etc....but this should give you a rough idea

class-map match-all voice
  match access-group 101
!
!
policy-map traffic
  class voice <- matches class-map voice
    priority 128
  class class-default <- all other traffic
   fair-queue
!
int s0
service-policy output traffic
!
access-list 101 permit tcp any eq 1720 any
access-list 101 permit tcp any any eq 1720
access-list 101 permit udp any any range 16383 16384
----- Original Message -----
From: "ccLABs" <ccLABs@wanit.com>
To: "'Ty'" <tycampbell@comcast.net>
Sent: Saturday, June 12, 2004 8:54 PM
Subject: RE: Traffic Priority

> Ty:
>
> What are the commands to implement RSVP or CBWFQ
>
> Thanks In Advance
>
> --------------------------------------------------------------------------

--
> -------------------------------
> DISCLAIMER: If You Are Not The Intended Recipient Do Not Access Or Use In
> Any Way!
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Ty
> Sent: Saturday, June 12, 2004 8:11 PM
> To: rexperts; ccielab@groupstudy.com
> Subject: Re: Traffic Priority
>
> seems like you can use either RSVP or CBWFQ for this then
>
>
> ----- Original Message ----- 
> From: "rexperts" <routerexpert@yahoo.com>
> To: "Ty" <tycampbell@comcast.net>; <ccielab@groupstudy.com>
> Sent: Saturday, June 12, 2004 6:59 PM
> Subject: Re: Traffic Priority
>
>
> > There is a full T1, however, when it gets tight I want the voice to
always
> take priority.
> >
> > Thanks In Advance
> >
> > Ty <tycampbell@comcast.net> wrote:
> > Sounds like CBWFQ to me
> >
> > how much bandwidth do want to allocate to voice, and how much to data ?
> >
> >
> >
> > ----- Original Message ----- 
> > From: "rexperts"
> > To:
> > Sent: Saturday, June 12, 2004 4:22 PM
> > Subject: Traffic Priority
> >
> >
> > > Simple setup
> > >
> > > This T1 line handles Voice and Data traffic.
> > > How do I set up queuing to give priority to voice traffic?
> > >
> > > Interface FastEthernet 0
> > > IP Address 12.12.12.1 255.255.255.248
> > > Speed auto
> > >
> > > Interface Serial 0
> > > IP Unnumbered
> > > Service-module T1 timeslots 1-24
> > >
> > > Thanks In Advance
> > >
> > >
> > >
> > > ---------------------------------
> > > Do you Yahoo!?
> > > Friends. Fun. Try the all-new Yahoo! Messenger
> >
> >
> >
> > ---------------------------------
> > Do you Yahoo!?
> > Friends.  Fun. Try the all-new Yahoo! Messenger

• Next message: Richard Dumoulin: "RE: sparse-mode and auto-rp"
• Previous message: Richard Dumoulin: "RE: Even routes but only first 30 networks..."
• Maybe in reply to: rexperts: "Traffic Priority"
• Next in thread: Richard Dumoulin: "RE: Traffic Priority"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:39 GMT-3