From: Tom Rogers (cccie71@yahoo.com)
Date: Sat Jun 12 2004 - 13:15:18 GMT-3
Correct ! I am trying to apply CBWFQ on a FR interface without any cir given.
Joe Chang <changjoe@earthlink.net> wrote:CBWFQ and FR shaping work on different OSI layers. The former is L3 and the
latter is L2. If you want L3 QoS to have an impact on FR, then I think there
are commands that map IP Precedence to the FR discard-eligible bit. The
method I'm guessing you are attempting -- configuring CBWFQ and FR with an
unspecified CIR -- may not work.
----- Original Message -----
From: "Tom Rogers"
To:
Sent: Friday, June 11, 2004 11:29 PM
Subject: frame-relay traffic QoS
> Hi all,
> I have basic question. If NO traffic shaping is asked and we re to
> guarantee protocol x to 90kbps using policy-map going out,
>
> then can do we apply serivice-policy on the FR interface outward
> directly or do we have to call this service-policy from map-class and
apply
> this map-class in FR interface after enabling traffic-shaping.
>
> What is confusing me is with no cir value given the FR traffic shaping
> would default to 56K and I just want to guarantee protocol x 90kbps.
>
>
> Tom
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Friends. Fun. Try the all-new Yahoo! Messenger
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:39 GMT-3