From: 910T (910t@cox.net)
Date: Sat Jun 12 2004 - 13:13:46 GMT-3
I'm also dealing with this very issue at the moment. For some reason, the
secured host route to the outside interface of the PIX stopped being
installed with the 4.x version of the client as it was with the 3.x client
(look at your statistics under Route Details). I installed the 3.6 client
into a Virtual PC and it works fine with the same PIX configurations. I'm
doing split-tunneling--perhaps there's a workaround by fiddling with the
split-tunnel ACL. We'll see...
Regards,
Mas Kato
https://ecardfile.com/id/mkato
----- Original Message -----
From: "Kareem Boules" <kareem@synergyct.com>
To: <ccielab@groupstudy.com>
Cc: <security@groupstudy.com>
Sent: Saturday, June 12, 2004 11:13 AM
Subject: SSH/IPSec to PIX
> Hey fellows,
>
> I wonder if someone can help with this scenario:
> When I establish an IPSec tunnel between my SW Client (ver. 4) and PIX
> (6.3), then I try to SSH to the PIX, it doesnt work. I tried out lots of
> things, but the only workaround I could do is to, first, telnet to an
inside
> host, then SSH to the PIX from that host.
> Any advice?
>
> Kareem
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:38 GMT-3