From: Karim (karim_ccie@hotmail.com)
Date: Thu Jun 10 2004 - 20:37:15 GMT-3
Hi all,
Confused regarding the following issue:
Normally (before changing defaults) vlan 1 will act as native, default and
management vlan. I was asking if there is a command to change the default vlan
globally same as the one used to change the native vlan ??
Also I believe there is no meaning for the concept of management vlan if ip
routing is enabled on the switch, as I will be reachable via the running IGP.
Am I right ??
If routing is not enabled on the switch, would the management vlan be any vlan
with ip address (or it has to be vlan 1 ???) plus ip default gateway command
pointing to a router connected to the switch ??
Thanks in advance,
Karim.
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:37 GMT-3