From: Wang Dehong-DWANG1 (Dehong.Wang@motorola.com)
Date: Thu Jun 10 2004 - 18:16:05 GMT-3
I am thinking about the following:
1. change the network type on ethernet to non-broadcast, unicast..
2. then add neighbour under ospf process.
Does it meet the requirments?
- Dehong
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Karim
Sent: Thursday, June 10, 2004 3:37 PM
To: ccielab@groupstudy.com
Subject: OSPF over broadcast - drop mulitcast.
Hi all,
Need your help in the following problem:
Having two routers on the same ethernet segment, asked to drop multicast
traffic betwen the two routers. Meanwhile make sure that adjacecny will still
established between the two routers.
I was thinking about a passive interface on both routers but passive interface
will drop the adjacency. So would it be solved with passive plus neighbor
command on both routers ?? Any ideas ??? am I thinking in the right direction
??
Thanks in advance,
Karim.
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:37 GMT-3