RE: FAX over IP

From: Richard Dumoulin (richard.dumoulin@vanco.es)
Date: Sat Jun 05 2004 - 08:51:51 GMT-3

• Next message: B: "RE: BGP route by way of no BGP RTR"
• Previous message: Richard Dumoulin: "RE: ATM SVC's and ILMI"
• Maybe in reply to: CCIE2B: "FAX over IP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

But basically to configure fax over IP you just do it as if it was normal
voip and the routers automatically detect it is a fax.
So first they do call setup and when the routers detect a fax tone (they
call it CED) they swap the voip codec for a fax codec and disable VAD and
echo cancellation if I remember well. Then there are some parameters that
can be adjusted like the rate etc ...with fax commands under the dial-peer.

--Richard

-----Original Message-----
From: Richard Dumoulin
Sent: sabado, 05 de junio de 2004 13:22
To: 'CCIE2B'; ccielab@groupstudy.com
Subject: RE: FAX over IP

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122
t/122t11/faxapp/index.htm

-----Original Message-----
From: CCIE2B [mailto:sumit.kumar@comcast.net]
Sent: sabado, 05 de junio de 2004 12:13
To: ccielab@groupstudy.com
Subject: FAX over IP

Does anyone have sample configuration/url for FAX over FXS cards for 26xx.

TIA

• Next message: B: "RE: BGP route by way of no BGP RTR"
• Previous message: Richard Dumoulin: "RE: ATM SVC's and ILMI"
• Maybe in reply to: CCIE2B: "FAX over IP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:33 GMT-3