From: James R. Yeo (james@net-brigade.com)
Date: Fri Jun 04 2004 - 17:01:44 GMT-3
Hi there,
You are missing:
async default routing
take out async dynamic routing
Kind regards
James
On Fri, 04 Jun 2004 15:20:02 -0300, Carlos G Mendioroz <tron@huapi.ba.ar>
wrote :
> Is the line up ?
>
> Zack Damen wrote:
>
> > I am trying to get a route into eigrp which is a directly connected
> > interface on the router. please look below for config, can you tell
me
> > what my problem is off the bat?
> >
> > interface Async161
> > description SLIP connection
> > ip address 10.139.236.61 255.255.255.252
> > async dynamic routing
> > async mode dedicated
> >
> > router eigrp 1
> > passive-interface default
> > network 10.0.0.0
> > no auto-summary
> > no eigrp log-neighbor-change
> >
> > router#show ip eigrp 1 topology 10.139.236.60 255.255.255.252
> > % IP-EIGRP (AS 1): Route not in topology table
> >
> > shouldn't I c it in the topology table local to te router, but its not
> > placing it in the table. I am a little lost as they say.
> >
> > Zack
> >
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
> --
> Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:33 GMT-3