From: pbubienczyk@szczesliwice.pl
Date: Wed Jun 02 2004 - 11:18:19 GMT-3
Thank you for your fast response - it works.
So, I've got one more question :)
Is it possible to configure ip rtp header-compression on FR link with
encapsulatyion other than CISCO?
I've IETF encapsulation and my routers (2621 XM with 12.2(8)T5 and 3640 with
12.2(5)) are advising me to change encapsulation to CISCO in order to get rtp
header-compression working.
thx - Peter
Quoting Mike Schlenger <mschlenger@meridianitsolutions.com>:
> Take a look at these commands under your loopback interfaces.
>
> H323-gateway voip interface
> H323-gateway voip bind srcad <in lo0>
>
> Mike
>
> Mike Schlenger
> CCIE #7079
>
> -----Original Message-----
> From: pbubienczyk@szczesliwice.pl [mailto:pbubienczyk@szczesliwice.pl]
> Sent: Wednesday, June 02, 2004 8:23 AM
> To: ccielab@groupstudy.com
> Subject: Voice - source/destinationa ddresses
>
> Hello
>
> My voip dial peers are configured with ip addresses of loopback
> interfaces
> on both ends (with session target command). But the RTCP and RTP
> communication
> is going with addresses of others interfaces (serial in this particular
> case).
> Is there is some way to configure routers that all voice communication
> will be
> held by using only loopback interfaces.
>
> Thx for your help - Peter
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:31 GMT-3