RE: ATM [bcc][faked-from]

From: marc russell (mrussell@ccbootcamp.com)
Date: Wed Jun 02 2004 - 01:01:12 GMT-3

• Next message: Ken Diliberto: "Re: Connecting two core switches / Design"
• Previous message: Sergio Jimenez Arguedas: "Fw: EXTENDED PING TO TEST IP MCAST GROUPS!!!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Sure, as long as your routers have matching interfaces. You may want to
pick up a 4-port Multi-mode card for your LS1010 as MM is usually
cheaper than single mode for router modules.

Marc Russell
Network Learning, Inc. (Cisco Training)
www.ccbootcamp.com

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ludwig Morales
Sent: Tuesday, June 01, 2004 10:07 PM
To: ccielab@groupstudy.com
Subject: ATM [bcc][faked-from]
Importance: Low

Hi everybody!!

Can i use a lightstream 1010n with the fallowing modules to simulate
ATM for
my lab.

Thanks

Module 3/0: 155SM - 4 Port Fibre/ATM

Module 3/1: 155SM/MM - 4 Port Fibre/ATM

Module 4/0: 155SM - 4 Port Fibre/ATM

Module 4/1: 155SM - 4 Port RJ45/ATM

• Next message: Ken Diliberto: "Re: Connecting two core switches / Design"
• Previous message: Sergio Jimenez Arguedas: "Fw: EXTENDED PING TO TEST IP MCAST GROUPS!!!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:31 GMT-3