From: ccie2be (ccie2be@nyc.rr.com)
Date: Thu May 27 2004 - 00:12:25 GMT-3
Yasser,
You're missing the snmp-server enable traps command without which no traps
will be sent to any mgmt station.
But, besides that if you don't explicitly list any traps in your snmp host
command, by default, all enabled traps will be sent. So, if you want to send
all traps to your nms1 except the hsrp trap, then you need to list the traps
you want sent to nms1 host and leave off the hsrp trap.
HTH
----- Original Message -----
From: "Yasser Aly" <blackyeyes00@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, May 26, 2004 6:49 PM
Subject: Sending traps to specific server
> Hello,
>
> If you have 2 management stations and you are asking to make the routers
> sending traps to them.
> It is requested to send hsrp traps only to the 2nd management station.
>
> Solution:
>
> NMS1: 1.1.1.1
> NMS2: 2.2.2.2
> Trap password: CISCO
>
>
> snmp-server host 1.1.1.1 CISCO
> snmp-server host 2.2.2.2 CISCO hsrp
>
> My question: If I am understanding this correctly, this config will send
> unconditional traps to NMS1 - including hsrp -, whereas NMS2 will receive
> only hsrp traps. Am I getting it correctly ?
>
> If yes then it is not acheiving the target. Is there a way to make NMS2
get
> hsrp traps without sending it to NMS1 ?
>
> Thanks for your reply.
> Yasser
>
> _________________________________________________________________
> Free yourself from those irritating pop-up ads with MSn Premium. Get
2months
> FREE*
>
http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=http://hotmail.com/enca&HL=Market_MSNIS_Taglines
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:17 GMT-3