From: Stephen Skinner (stephen_ski@hotmail.com)
Date: Wed May 19 2004 - 10:58:20 GMT-3
guys,
my appologies if you are getting this message several times but i am not
sure i am getting my posts throught
i have two questions
Q
ensure all traffic coming in on E0/0 is limited to 1.6 mbits
Q
ensure all traffic coming in on S0/0 is limited to 512k
now i think i am right by saying that i can do this with either a route-map
(policy-map) senario.or a rate limit senarios as below
Policy map
=====================================
class-map j
match any
policy-map steve
class j
police 512000 1000 be 1000 conform ... exced ....
int s0/0
service-policy input j
Rate limit
======================================
int e0/0
rate-limit input 1600000 1000 2000 conform ....exceed
my question is this
if i was to put these command`s in place then in theory i would have a max
throughput of (e0/0)
16000000+1000+2000
in the LAB ....should i make my calcs like this ...
rate-limit input 1597000 1000 2000 conform ....exceed
to give me a total of 1600000 .....
now i know what i think....but the Q DID state....no more than 1,600,000
bits...????
what isa everyone`s thought`s
TIA
steve
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:13 GMT-3