From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Tue May 18 2004 - 16:54:28 GMT-3
Willem,
In networking (and computing at large I think) 1Kbps is 1000bps,
not 2^10 (1024) bps as it really should be. This also goes for 1000Kbps
being 1Mbps, and 1000Mbps being 1Gbps, etc. This is also true for
storage if I remember correctly, and 1Gb of storage is 1 billion bits,
not 2^30 bits. It's probably just a marketing thing, or if there is
some real reason I'm sure Howard knows ;)
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Willem Abrie
> Sent: Tuesday, May 18, 2004 12:12 PM
> To: ccielab@groupstudy.com
> Subject: Bandwidth on CIR, BC, BE, etc.
>
> In regards to the bandwidth to be configured in the LAB.
>
> I've done a couple of the IPExpert Prep Labs, and they all seem to
> indicate that when in any given scenario you have to say for instance
> configure 3 Mb/s CIR, they configure it with CIR = 3000 kb/s.
>
> My question would be if the bandwidth is 3 Mb/s, shouldn't it be 3 *
> 1024 kb/s, which would give 3072 kb/s instead? Are you allowed to use
> the calculator on the Windows 2000 box you use to configure the 8 or 9
> Routers and Switch to calculate the precise X times 1024?, or is it a
> straight forward X times 1000 to get the Bandwidth amount?
>
> Regards
>
> Willem
>
>
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:13 GMT-3