From: Richard Gallagher (rgallagh@cisco.com)
Date: Thu May 13 2004 - 14:43:59 GMT-3
You send 3 probes out by default, and it seems you have 2 paths to the
destination.
You can modify the number of probes using an extended traceroute.
Rich
On Thu, 2004-05-13 at 18:24, Dan wrote:
> Hello all,
>
> On what section on the CCO I can find documentation for exec commands?
>
> Especially, why I have many lines on traceroute and only few row number
> (hop numbers)
> Cat3550-2#traceroute 140.10.1.1
>
> Type escape sequence to abort.
> Tracing the route to 140.10.1.1
>
> 1 140.10.101.7 0 msec
> 140.10.101.5 0 msec
> 140.10.101.7 4 msec
> 2 140.10.100.2 28 msec
> 140.10.78.8 8 msec
> 140.10.100.2 28 msec
> 3 140.10.102.9 4 msec
> 140.10.124.1 28 msec
> 140.10.102.9 4 msec
>
> Thanks,
> Dan
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:11 GMT-3