From: MMoniz (ccie2002@tampabay.rr.com)
Date: Sun May 09 2004 - 17:02:39 GMT-3
Tony, I am kind of confused on what your requirements are for this. Further
it is my understanding that BGP inject maps are used to advertise more
specific routes not less specific.
Can you post the question you are trying to solve and your BGP configs?
This is from the BGP doc on cco.
Only prefixes that are equal to or more specific than the original prefix
may be injected.
Thanks,
Mike
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Tony
Sent: Sunday, May 09, 2004 3:13 PM
To: ccielab@groupstudy.com
Subject: Re: Bgp summary
Hi GS
Did anyone get this to work? I am having a hard time
duplicating this scenario:
Out of all the issues, my main concern is I can't get
rid of the aggregate /19 on R2 due to the dependency
of the inject-map command. If I filter the aggregate,
the inject-map WILL NOT WORK and I need it to work.
R1
197.68.1.0/24 <--I can't get rid of /24 cuz it is
classful
197.68.2.0/24
197.68.3.0/24
197.68.0.0/19 <--ok, used aggregate
R2
*>i197.68.0.0/19 <--how do you get rid of this as it
"seems" need it for the inject-map to work?
*>i197.68.0.0/16 <-ok, used inject-map
*>i197.68.1.0
*>i197.68.2.0
Note- use DL on R1 to get rid of 3.0
R6
*> 197.68.0.0/16 <--I can't get rid of cuz it is NOT
classful
Note- use DL on R2 to get rid of 1.0/2.0 and /19
TIA
############
r1-->r2.----R6
r1 send following route to R2
197.68.1.0/24,
197.68.2.0/24
197.68.3.0/24
197.68.0.0/19
In R2,after summarization, In BGP table we get
following routes
*> 192.68.0.0/16
*> 192.68.1.0
*> 192.68.2.0
Goal :
Only 197.68.0.0 should be appear in Bgp table of
R6--without /16 We cannot use summary command,suppres
route map at R2
##################
__________________________________
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs
http://hotjobs.sweepstakes.yahoo.com/careermakeover
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:08 GMT-3