From: Richard Dumoulin (richard.dumoulin@vanco.es)
Date: Wed May 05 2004 - 17:44:37 GMT-3
Tru shut no shut and then shi isdn stat to see if it says spid1 valid. Sorry
I have no experience with isdn simulators cause I use real isdn !!
-----Original Message-----
From: CCIE Canidate [mailto:cisco@heartofdarknessstudios.com]
Sent: miircoles, 05 de mayo de 2004 22:36
To: Kenneth Wygand
Cc: ccielab@groupstudy.com
Subject: Re: Having trouble with Kaslow's ISDN example
I am using an ISDN simulator, and have added the spids from my
simulator. I am getting the following error:
R2#sh isdn stat
Global ISDN Switchtype = basic-ni
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = basic-ni
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 66, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
TEI 66, ces = 1, state = 8(established)
spid1 configured, spid1 NOT sent, spid1 NOT valid
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0
This in a nutshell is telling me that my spids are not valid and not
being sent. I am not sure of what I'm doing wrong at this point.
Thanks,
Kenneth Wygand wrote:
>Hello,
>
>I am assuming you are using an ISDN simulator and not connecting the
>router's BRI ports back-to-back, correct?
>
>Kenneth E. Wygand
>Systems Engineer, Project Services
>CISSP #37102, CCNP, CCDP, ACSP, Cisco IPT Design Specialist, MCP, CNA,
>Network+, A+
>Custom Computer Specialists, Inc.
>"The only unattainable goal is the one not attempted."
>-Anonymous
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>CCIE Canidate
>Sent: Wednesday, May 05, 2004 4:09 PM
>To: ccielab@groupstudy.com
>Subject: Having trouble with Kaslow's ISDN example
>
>I have been trying to make the basic ISDN config in Kaslow's book to
>work, but am having issues. This is my config:
>
>R1:
>
>interface BRI0
> ip address 172.16.1.1 255.255.255.0
> encapsulation hdlc
> dialer string 2222
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 22220101 2222
>
>dialer-list 1 protocol ip permit
>
>R2:
>interface BRI0
> ip address 172.16.1.2 255.255.255.0
> no ip directed-broadcast
> dialer string 1111
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 11110101 1111
>
>
>dialer-list 1 protocol ip permit ----------------------------------END
>
>I am trying to make this basic config work between 2 devices and am
>getting stuffed. Can somebody point me in the right direction?
>
>Thanks!
>
>
>ISDN Challenged guy
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:05 GMT-3