From: Kenneth Wygand (KWygand@customonline.com)
Date: Wed May 05 2004 - 10:33:53 GMT-3
Dan,
Thanks. According to the Bradshaw Labs website, the following topics
are covered in the ATM labs. One thing I don't see is PPPoATM, which is
one of my weaker points. Will this Bradshaw labs ATM content cover all
possible ATM scenario's in the lab? If it doesn't include PPPoATM, will
it cover all other ATM scenario's? If this is the case, is it
recommended that this material is supplemented by another source of
material to learn PPPoATM and any other topics this Bradshaw material
does not cover?
Thanks in advance!
Ken
<snip>
ATM ADDRESSING
THREE ATM ADDRESS TYPES
ATM CONNECTION TYPES
POINT-TO-POINT (PTP)
MULTIPOINT
PVC'S
RESERVED VCI'S
PVC MAPPING
SVC'S
ILMI
ILMI PVC-DISCOVERY
SVC MAPPING
STATIC IP TO ATM VC MAPPINGS
ATM CONFIGURATIONS
MULTIPROTOCOL ENCAPSULATION (2684)
ENCAPSULATION TYPES
CONFIGURING PVC'S
MULTIPROTOCOL ENCAPSULATION SVC CONFIGURATIONS
CLASSICAL IP (CLIP) - (RFC 2225 / 1577)
ARP SERVER CONFIGURATIONS
CONFIGURATION SUMMARY
MULTICASTING IN ATM
CONFIGURATIONS
OTHER CONFIGURATION OPTIONS
PVC MONITORING
CLASS OF SERVICE'S OVERVIEW
TRAFFIC SHAPING CELL RATES
TYPES OF CLASS OF SERVICE'S
UBR (UNSPECIFIED BIT RATE)
UBR+ (UNSPECIFIED BIT RATE PLUS)
ABR (AVAILABLE BIT RATE)
CBR (CONSTANT BIT RATE)
VBR-NT (VARIABLE BIT RATE - NOT REAL-TIME)
VBR-RT (VARIABLE BIT RATE REAL TIME)
RATE QUEUES AND ENCAPSULATION TYPES SUPPORTED
SVC CLASS OF SERVICE
CLASS OF SERVICE CELL RATE GUARANTEES
TRANSMIT PRIORITIES
TRAFFIC MANAGEMENT OBJECTIVES
PVC TRAFFIC MANAGEMENT
LEARNING LABS
LAB DIAGRAM
ATM LAB 1 (FIND PVC'S AND NSAP ADDRESS)
ATM LAB 2 (MPE PVC ONE VC PER PROTOCOL)
ATM LAB 3 (MPE PVC ONE VC FOR ALL PROTOCOLS)
ATM LAB 4 (SVC WITH ILMI AND MAPPING)
ATM LAB 6 (SVC W/O ILMI)
ATM LAB 7 (CLIP PVC)
ATM LAB 8 (PVC W/ BRIDGING)
ATM LAB 9 (CLIP SVC WITH ILMI)
ATM LAB 10 (CLIP SVC W/O ILMI)
TROUBLESHOOTING DEBUG COMMANDS
RFC'S
WEB RESOURCES
</snip>
Kenneth E. Wygand
Systems Engineer, Project Services
CISSP #37102, CCNP, CCDP, ACSP, Cisco IPT Design Specialist, MCP, CNA,
Network+, A+
Custom Computer Specialists, Inc.
"The only unattainable goal is the one not attempted."
-Anonymous
-----Original Message-----
From: Dan [mailto:dans@danbsd.a.la]
Sent: Wednesday, May 05, 2004 8:21 AM
To: Kenneth Wygand; ccielab@groupstudy.com
Subject: Re: ATM to know for lab
I used the ATM lab from www.bradshawlabs.com
I learned it once. I took about 4 hours of rack time.
I learned almost everything needed to do my IPExpert labs.
For me, atm is VERY easy now. I using atm only for CCIE study.
Good luck.
On Tue, 4 May 2004 22:12:27 -0400, Kenneth Wygand
<KWygand@customonline.com> wrote:
> Group,
> I know there are many ways to configure ATM that is possible to be
> tested on CCIE R&S Lab based on Cisco's list of excluded topics... The
> topics I can think of that can be tested include:
> PVCs (static and autodiscovery)
> Major Interfaces, Subinterfaces
> SVCs
> LANE (arp-server, etc)
> PPPoATM
> Virtual Templates
> Dialer Profiles
> Various encapsulation types
> Cisco Proprietary & Open Standards
> VoATM
> Is there a single reference material (book or document of some sort)
> that can be used to understand and prepare for anything the R&S lab
can
> throw at us?
> Thanks in advance,
> Ken
>
>
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:04 GMT-3