From: NETTABLE_WALKER (nettable_walker@hotmail.com)
Date: Sun May 02 2004 - 21:32:45 GMT-3
what happens if after Trying R1 (1.1.1.1, 2009)... Open
you reboot the router you are connecting to ?
Richard
#12388
//
----- Original Message -----
From: "Amit Khopkar" <akhopkar@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, May 02, 2004 5:35 AM
Subject: untamed 2511 ... experts pls help
> Hi,
>
> i have a problem with the terminal server (2511).
>
> i am trying to access 4 other 2500's thru the terminal server.
>
> i have the follwing configured on the 2511
>
> ip host R1 2001 1.1.1.1
>
> !
> Interface loopback 0
> ip address 1.1.1.1 255.255.255.255
> !
> line 1 16
> no exec
> transport input all
> !
>
> all routers can be accessed thru console when connected directly to the
PC.
>
> when i try to reverse telnet into the routers i get the message
> ACC_SER#r1
> Trying R1 (1.1.1.1, 2009)... Open
>
>
> cant go further.....
> i cant access the console.... if i boot the managed router i can see the
boot up sequence and messages... but cannot access it
>
> have tried looking into the archives without success....
>
> i have already tried
> flowcontrol
> modem commands
> stopbits
> speeds
> various terminal emulation programs
> different IOS
>
> how do i check if it is a hardware problem....
> i check the octal cable connectivity and it looks good....
>
> what do i check next...
>
> rgds
> amit
>
>
>
>
>
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Win a $20,000 Career Makeover at Yahoo! HotJobs
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:03 GMT-3