From: Erling Bjontegard (erli-b@online.no)
Date: Fri Apr 30 2004 - 18:53:50 GMT-3
Hi Amit,
here is the config for my 2511 terminal server. This config is working ok
for me.
- Erling.
TermServ#sh run
Building configuration...
Current configuration : 1386 bytes
!
version 12.2
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname TermServ
!
logging rate-limit console 10 except errors
aaa new-model
aaa authentication login vty local
aaa authentication login tty none
enable password 7 01160A125E191302
!
username xxxx password 7 yyyy
ip subnet-zero
no ip finger
no ip domain-lookup
ip host r4 2004 172.16.1.1
ip host r3 2003 172.16.1.1
ip host r2 2002 172.16.1.1
ip host r1 2001 172.16.1.1
ip host BB3 2012 172.16.1.1
ip host BB2 2011 172.16.1.1
ip host BB1 2010 172.16.1.1
ip host r9 2009 172.16.1.1
ip host r8 2008 172.16.1.1
ip host r7 2007 172.16.1.1
ip host r6 2006 172.16.1.1
ip host r5 2005 172.16.1.1
ip host switch2 2014 172.16.1.1
ip host switch1 2013 172.16.1.1
!
no ip dhcp-client network-discovery
!
!
!
!
interface Loopback0
ip address 172.16.1.1 255.255.255.0
!
interface Ethernet0
ip address 10.160.4.62 255.255.255.240
!
interface Serial0
no ip address
shutdown
no fair-queue
!
interface Serial1
no ip address
shutdown
!
ip kerberos source-interface any
ip classless
ip route 0.0.0.0 0.0.0.0 10.160.4.49
ip http server
!
!
!
line con 0
exec-timeout 0 0
transport input none
line 1 16
no exec
login authentication tty
transport input all
line aux 0
line vty 0 4
exec-timeout 0 0
login authentication vty
!
end
TermServ#
----- Original Message -----
From: "Amit Khopkar" <akhopkar@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Friday, April 30, 2004 7:48 PM
Subject: Group ... pls help me with my terminal server
> hi group,
>
> i am using a 2511 as terminal server. i have to acess some routers via
this 2511.
> when i open a reverse telnet to line 9
> the router stops at
> Trying R1 (1.1.1.1, 2009)... Open
>
> if the relad the router connected to line 9 i can see the boot up
sequence. i cannot send break to that router or enter it....
>
> i have tried the following:
> changing stopbits to 1
> fixig tx and rx speeds to 9600
> changing IOS (12.0, etc)
> flowcontrol none
> modem inout
> modem printer
> modem host
> hyperterm, telnet and SecureCRT
>
> no exec and transport input all commands are present
>
> all routers can be accessed thru the console
>
> ACC_SER#sh runn
> Building configuration...
> Current configuration:
> !
> version 11.2
> no service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname ACC_SER
> !
> enable secret 5 $1$yChq$7mdBYUSBoNzsvNtGwP2U70
> !
> no ip domain-lookup
> ip host R1 2009 1.1.1.1
> !
> interface Loopback0
> ip address 1.1.1.1 255.255.255.255
> !
> interface Ethernet0
> ip address 10.10.10.254 255.255.255.0
> !
> interface Serial0
> no ip address
> shutdown
> no fair-queue
> !
> interface Serial1
> no ip address
> shutdown
> !
> no ip classless
> !
> !
> line con 0
> line 1 16
> no exec
> transport preferred telnet
> transport input all
> stopbits 1
> line aux 0
> line vty 0 4
> password cisco
> login
> !
> end
>
> ACC_SER#sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) 2500 Software (C2500-J-L), Version 11.2(18), RELEASE SOFTWARE
(fc1)
> Copyright (c) 1986-1999 by cisco Systems, Inc.
> Compiled Mon 05-Apr-99 20:17 by jaturner
> Image text-base: 0x0303F240, data-base: 0x00001000
> ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
> BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c),
RELEASE SOFTWARE (fc1)
> ACC_SER uptime is 6 minutes
> System restarted by reload
> System image file is "flash:c2500-j-l_112-18.bin", booted via flash
> cisco 2511 (68030) processor (revision M) with 14336K/2048K bytes of
memory.
> Processor board ID 15616375, with hardware revision 00000000
> Bridging software.
> SuperLAT software copyright 1990 by Meridian Technology Corp).
> X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
> TN3270 Emulation software.
> 1 Ethernet/IEEE 802.3 interface(s)
> 2 Serial network interface(s)
> 16 terminal line(s)
> 32K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read ONLY)
> Configuration register is 0x2102
>
> ACC_SER#r1
> Trying R1 (1.1.1.1, 2009)... Open
>
>
> can anyone offer suggestions / solution
>
>
> best rgds
> amit
>
>
> ---------------------------------
> Do you Yahoo!?
> Win a $20,000 Career Makeover at Yahoo! HotJobs
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:58 GMT-3