From: Richard Dumoulin (richard.dumoulin@vanco.es)
Date: Thu Apr 29 2004 - 16:58:30 GMT-3
For this to work you need encapsulation ppp but pppoe works if you have a
pppoe client configured (normally used in adsl).
I suggest that you use IRB.
--Richard
-----Original Message-----
From: RExpert [mailto:routerexpert@yahoo.com]
Sent: jueves, 29 de abril de 2004 21:48
To: ccielab@groupstudy.com
Subject: Same IP on E0/0 and E0/1
I need help like right now - BIG Thanks to everyone that responds.
I am trying to put the exact same IP Address on 2 different ethernet
interfaces. The only thing that I could think of is - interface multilink
1, but it is not working, here is my config:
interface Multilink1
ip address 66.106.47.230 255.255.255.252
ppp multilink
multilink-group 1
Ethernet 0/0
no ip address
ip load-sharing per-packet
no ip mroute-cache
ppp multilink
multilink-group 1
Ethernet 0/1
no ip address
ip load-sharing per-packet
no ip mroute-cache
ppp multilink
multilink-group 1
---------------------------------
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:57 GMT-3