From: Kenneth Wygand (KWygand@customonline.com)
Date: Thu Apr 29 2004 - 16:55:26 GMT-3
Hello,
Multilink will not work... you need to "unnumber" one of the interfaces
to the other interface as follows:
Ethernet 0/0
ip address 66.106.47.230 255.255.255.252
Ethernet 0/1
Ip unnumbered Ethernet0/0
This is usually not a good way to do this though. What is it exactly
you are trying to accomplish, as there may be a better method.
HTH,
Kenneth E. Wygand
Systems Engineer, Project Services
CISSP #37102, CCNP, CCDP, ACSP, Cisco IPT Design Specialist, MCP, CNA,
Network+, A+
Custom Computer Specialists, Inc.
"The only unattainable goal is the one not attempted."
-Anonymous
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
RExpert
Sent: Thursday, April 29, 2004 3:48 PM
To: ccielab@groupstudy.com
Subject: Same IP on E0/0 and E0/1
I need help like right now - BIG Thanks to everyone that responds.
I am trying to put the exact same IP Address on 2 different ethernet
interfaces. The only thing that I could think of is - interface
multilink 1, but it is not working, here is my config:
interface Multilink1
ip address 66.106.47.230 255.255.255.252
ppp multilink
multilink-group 1
Ethernet 0/0
no ip address
ip load-sharing per-packet
no ip mroute-cache
ppp multilink
multilink-group 1
Ethernet 0/1
no ip address
ip load-sharing per-packet
no ip mroute-cache
ppp multilink
multilink-group 1
---------------------------------
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:57 GMT-3