From: Scott Morris (swm@emanon.com)
Date: Thu Apr 22 2004 - 09:52:18 GMT-3
Other way around...
16384-32767 = voice
32768-49151 = whiteboard
49152-65535 = video
For voice, they come in pairs. The even and the odd number right above it.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, CISSP,
JNCIS, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Yasser Abdullah
Sent: Thursday, April 22, 2004 3:09 AM
To: 'Joseph D. Phillips'; 'Group Study (E-mail)'
Subject: RE: Configuring RTP priority, IOS ver. 12.2(1d)
Your rtp range is incorrect in the map-class. Your lower bound of des udp
ports should be 16383 and the range should be 16384 (RTP uses the range
16383-32768).
Your bandwidth calculation looks ok.
Brgds,
Yasser
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joseph D. Phillips
Sent: Thursday, April 22, 2004 1:17 AM
To: Group Study (E-mail)
Subject: Configuring RTP priority, IOS ver. 12.2(1d)
I found out I can't use modular QoS for certain things with IOS 12.2(d).
How would you convert the following to the older method?
class-map match-all rtp
match protocol rtp
policy-map rtp
class rtp
priority percent 25
interface Serial1/0
service-policy output rtp
The doc CD has me configuring a map-class, but I don't know if the command
to use is correct:
map-class frame-relay rtp
frame-relay ip rtp priority 2000 16383 289
The show queue for that interface is:
r3#sho queue s1
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/3/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 1158 kilobits/sec
Do I just take 1158 and divide by 4 to get the 25% available bandwidth?
map-class frame-relay rtp
frame-relay priority
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:52 GMT-3