From: Rob Laidlaw (laidlaw@consecro.com)
Date: Mon Apr 19 2004 - 11:13:05 GMT-3
Have you manually set the speed and duplex on both switches?
----- Original Message -----
From: "Carl Celliers - CPX RSO Jhb" <Carl.Celliers@Comparex.co.za>
To: <ccielab@groupstudy.com>
Sent: Monday, April 19, 2004 5:08 AM
Subject: NM-16ESW connection problems
> Hello All
>
> I have a problem which I can not figure out.
>
> In my lab kit I have a 3745 with a NM-16ESW (Cat2) and a Cat 3550
> (Cat1). When I connect the Cat1 int f0/13 to the Cat2 int f1/13, with a
> cross-over cable, the Cat1 int shows it's not connected and the Cat2
> says the line is up but the protocol is down. I have tried different
> cables (cross-over and straight) and various other ports on the two
> switches, all with the same results. Im trying to setup a trunk between
> the two switches. The ports are not faulty as ive successfully connected
> pc's and routers.
>
> Has anyone experienced something similar?
> Is this an official issue with a patch or work around?
>
> Kind Regards,
> Carl C
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:49 GMT-3