From: Lee Donald (Lee.Donald@bacs.co.uk)
Date: Fri Apr 16 2004 - 10:16:56 GMT-3
One assigns the class to the interface, one assigns the class to the DLCI.
Cheers.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
C.Sammarcellino@sirtisistemi.it
Sent: 16 April 2004 15:11
To: ccielab@groupstudy.com
Subject: Help About FRTS
What is the difference betwen the two following configuration.
Conf: A
interface Serial0/0.52 point-to-point
ip address 138.10.25.1 255.255.255.252
ip router isis
frame-relay interface-dlci 501
class FRTS_R5
Conf: B
interface Serial0/0.52 point-to-point
ip address 138.10.25.1 255.255.255.252
ip router isis
frame-relay class FRTS_R5
frame-relay interface-dlci 501
where map-class is:
map-class frame-relay FRTS_R5
frame-relay cir 128000
frame-relay bc 128000
frame-relay mincir 64000
frame-relay adaptive-shaping becn
frame-relay priority-group 1
priority-list 1 protocol ip high tcp telnet
Bye
Ciro
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:48 GMT-3