From: Tom Young (gitsyoung@yahoo.co.jp)
Date: Wed Apr 14 2004 - 22:19:37 GMT-3
Marvin
You means if I want to set a manage ip for managing the
stacked switch, cluter config is the only way ?
I think the cluter and stack are two different
technology of switch. Stack should keep a namage ip itself
, like cat3750 stack , doesn't it?
Thanks alot
--- Marvin Greenlee <marvingreenlee@yahoo.com> $B$+$i$N%a(B
$B%C%;!<%8!'(B
> If you have a single amber connection that is normal
> (STP blocking).
>
> If you're looking to manage with a single IP
> address,
> clustering is the way to go. Clustering provides
> the
> multidevice management technology, where stacking
> provides the physical interconnectivity. From the
> command switch, you can use the command "rcommand X"
> where x is the number of the other switch member.
> You
> can also use the CMS web interface to connect to the
> management address assigned, view the topology, and
> adjust settings for any port in the cluster.
>
>
> "Switch Clustering technology allows customers to
> manage a stack of devices within a wiring closet or
> a
> broadly dispersed set of devices across a campus as
> a
> single IP entity. Switch Clustering technology uses
> standard TCP/IP packets to distribute and collect
> management information for all switches in the
> cluster. Switch Clustering supports a broad range of
> physical interconnections, including the GigaStack
> GBIC."
> Cisco GigaStack GBIC - Cisco 2950 Series Switches -
>
http://www.cisco.com/en/US/products/hw/switches/ps628/products_data_sheet09186a00800a1789.html
>
> Sincerely,
> Marvin Greenlee
> Network Learning, Inc
> marvin@ccbootcamp.com
>
> --- Tom Young <gitsyoung@yahoo.co.jp> wrote:
> > Adam
> > Thanks, you are right, I am doing the GSTACK
> > gbics, for
> > two cat2950s, one interface(Half of a gbic) is
> amber
> > lamp
> > on, maybe it is in spainning-tree block mode. And
> I
> > haven't do any config on these switchs. I don't
> know
> > how
> > to operate the two switch as one, I couldn't find
> > any
> > document for it.
> > For example, how to control other switchs if
> you
> > on one
> > switch in the stack. And which command could be
> used
> > for
> > checking stack status? Do you have some document
> > about
> > these operation ?
> >
> > Thanks alot
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Tax Center - File online by April 15th
> http://taxes.yahoo.com/filing.html
>
>
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:47 GMT-3