From: Edwards, Andrew M (andrew.m.edwards@boeing.com)
Date: Fri Apr 09 2004 - 14:32:08 GMT-3
Bingo! Rip Version 2 summary address.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft
/120t/120t7/sumadr.htm
"ip summary-address rip 10.1.1.0 255.255.255.0 command on the network
access server port that provides addresses to dialup clients to cause
the router to advertise 10.1.1.0/24 routes to dialup clients. Because a
summary route is advertised, advertisement of the /32 host routes
(installed when the dialup client connects) is suppressed so that the
router does not advertise these routes to the network access server
interface. "
andy
-----Original Message-----
From: Scott Morris [mailto:swm@emanon.com]
Sent: Friday, April 09, 2004 10:05 AM
To: Edwards, Andrew M; ccielab@groupstudy.com
Subject: RE: removing /32 bit routes
Run version 1?
;)
Where are the coming from, and why do you want to remove them? How
about a summary address? (ip summary-address rip)
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
CISSP, JNCIS, et al. IPExpert CCIE Program Manager IPExpert Sr.
Technical Instructor swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Edwards, Andrew M
Sent: Friday, April 09, 2004 11:51 AM
To: ccielab@groupstudy.com
Subject: Re: removing /32 bit routes
Can someone tell me how to remove /32 bit routes when you are running
RIP?
Andy
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:44 GMT-3