From: Serran (groupstudy@swiftdsl.com.au)
Date: Mon Apr 12 2004 - 16:26:23 GMT-3
hi Scott,
I think this is a related issue.. can you explain this further..
based on the classfulness of ripv1, i do not understand how a /32 can show
up for a ptp serial link when the link is eg. set at a /27. The /32 is an
IP of one end of the serial /27 link. I can produce results where the /27
serial link does not propogate (even if /27 is consistant throughout the rip
v1 domain), and the /32 ends up being advertised instead.
the things is.. i would expect both sides of the serial to advertise a /32
throughout the rip domain, however, only 1 /32 is ever advertised. having
said that the /32 that is not advertised throughout, is visible on the
router on the other side of the serial ppp link.
there isn't much info I have search on that explains this. I am thinking
this is virtual-access specific and not ripv1 specific.
regards
Serran
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Scott Morris
Sent: Saturday, 10 April 2004 3:05 AM
To: 'Edwards, Andrew M'; ccielab@groupstudy.com
Subject: RE: removing /32 bit routes
Run version 1?
;)
Where are the coming from, and why do you want to remove them? How about a
summary address? (ip summary-address rip)
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, CISSP,
JNCIS, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Edwards, Andrew M
Sent: Friday, April 09, 2004 11:51 AM
To: ccielab@groupstudy.com
Subject: Re: removing /32 bit routes
Can someone tell me how to remove /32 bit routes when you are running RIP?
Andy
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:46 GMT-3