From: Tony Schaffran (groupstudy@cconlinelabs.com)
Date: Fri Apr 09 2004 - 00:37:38 GMT-3
You could also just change the lmi type and the line will go DOWN and the
backup interface will kick in.
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie2002@bellsouth.net
Sent: Thursday, April 08, 2004 7:37 PM
To: ccielab@groupstudy.com
Subject: Internetworkexpert Lab 2
All:
I am working on the internetwork lab and I am having problems
with my isdn. The goal is go have the frame relay go down. Once
the frame relay goes down, the isdn should kick in with
PPP callback. The isdn is a backup interface. To try to
jump start the isdn, I went to the remote side and downed
the frame relay link. However, my isdn would not kick in.
Any suggestions on why it is not working.
****************************** Router 5 *********************
Cisco2503_R5#show isdn status
Global ISDN Switchtype = basic-ni
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = basic-ni
Layer 1 Status:
DEACTIVATED
Layer 2 Status:
Layer 2 NOT Activated
TEI Not Assigned, ces = 1, state = 3(await establishment)
spid1 configured, spid1 NOT sent, spid1 NOT valid
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x00000000
--More--
username ROUTER4 password 0 cisco
interface BRI0
description port B s1 40822222221 s2 40822222222
ip address 132.1.45.5 255.255.255.248
ip router isis
encapsulation ppp
dialer map clns 49.0035.0006.0006.00 name ROUTER4 broadcast 4082222222
dialer map ip 132.1.45.4 name ROUTER4 broadcast 4082222222
dialer-group 1
isdn switch-type basic-ni
isdn spid1 40811111111 4081111111
ppp callback request
ppp authentication chap callout
ppp chap hostname ROUTER5
ppp multilink
isis circuit-type level-2-only
end
Cisco2503_R5#
Cisco2503_R5#sh run int s0.1
Building configuration...
Current configuration : 186 bytes
!
interface Serial0.1 point-to-point
backup interface BRI0
ip address 132.1.35.5 255.255.255.0
ip router isis
frame-relay interface-dlci 513
isis circuit-type level-2-only
end
Cisco2503_R5#
**************************** Router 4 configs below **********************
username ROUTER5 password 0 cisco
interface BRI0
description port A s1 40811111111 s2 40811111112
ip address 132.1.45.4 255.255.255.248
ip router isis
encapsulation ppp
dialer idle-timeout 0
dialer map clns 49.0035.0005.0005.00 name ROUTER5 broadcast 4081111111
dialer map ip 132.1.45.5 name ROUTER5 class CALLBACK 4081111111
dialer-group 1
isdn switch-type basic-ni
isdn spid1 40822222222 4082222222
cdapi buffers regular 0
cdapi buffers raw 0
cdapi buffers large 0
ppp callback accept
ppp authentication chap callin
ppp chap hostname ROUTER4
ppp multilink
dialer-list 1 protocol ip permit
map-class dialer CALLBACK
dialer callback-server username
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:44 GMT-3