From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Wed Apr 07 2004 - 12:41:19 GMT-3
David,
You need to change:
dial-peer voice 40 voip
destination-pattern 5281101
session target ipv4:220.20.3.192
To:
dial-peer voice 40 voip
destination-pattern 95281101
session target ipv4:220.20.3.192
Then apply the translation rule to the VoIP dial-peer, not the
voice-port.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> David Hurtado
> Sent: Tuesday, April 06, 2004 11:29 AM
> To: ccielab@groupstudy.com
> Subject: Translation rules to Inbound Calls
>
> Hello everybody,
>
> I'm trying to apply a translation rule to voice-port 2/1 for inbound
> calls.
> I want to translate from 95281101 to 5281101. This is my
configuration:
>
> ial-peer voice 10 pots
> destination-pattern 5551313
> port 2/0
> !
> dial-peer voice 20 pots
> destination-pattern 5552323
> port 2/1
>
> !
> dial-peer voice 40 voip
> destination-pattern 5281101
> session target ipv4:220.20.3.192
> !
>
> voice-port 2/1
> translate called 32
>
> translation-rule 32
> Rule 0 95281101 5281101
>
>
> but when i start introducing the called number (95281101), i introduce
> number 9, and because there is no dial-peer with a
destination-pattern
> starting with 9, the router doesn't accept any more numbers.
>
> Could somebody tell me what i'm missing, please?
>
> Thanks a lot
>
> _________________________________________________________________
> Correos mas divertidos con fotos y textos incrembles en MSN 8.
Pruibalo
> gratis dos meses. http://join.msn.com/?pgmarket=es-es&XAPID=45&DI=1055
>
>
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:44 GMT-3