From: Alexander Arsenyev (GU/ETL) (alexander.arsenyev@ericsson.com)
Date: Wed Apr 07 2004 - 05:32:55 GMT-3
AFAIK, translation-rule takes effect AFTER outgoing dial-peer is matched.
In the config below, there is no dial-peer with destination-pattern starting with 9,
therefore there will be no further call processing and if this config is tested on FXS port
with real phone (not csim start) one can hear series of short fast "beeps" in the receiver
after dialing 9.
HTH,
Cheers
Alex
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Allan Wells
Sent: 07 April 2004 07:49
To: Bill; ccielab@groupstudy.com
Subject: Re: Translation rules to Inbound Calls
translation-rule 32
Rule 32 95...... 5
translate called
Otherwise bills suggestion will do the trick
----- Original Message -----
From: "Bill" <bhammill@comcast.net>
To: <ccielab@groupstudy.com>
Sent: Wednesday, April 07, 2004 3:27 PM
Subject: Re: Translation rules to Inbound Calls
> You need to be using number expansion for what your trying to accomplish
>
> num-exp 95281101 5281101
>
> To the best of my knowledge translation rules are used to prepend numbers,
> they won't strip off digits
> number expansion can subsitute and remove digits.
>
>
>
> ----- Original Message -----
> From: "David Hurtado" <dei2viccie@hotmail.com>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, April 06, 2004 12:29 PM
> Subject: Translation rules to Inbound Calls
>
>
> > Hello everybody,
> >
> > I'm trying to apply a translation rule to voice-port 2/1 for inbound
> calls.
> > I want to translate from 95281101 to 5281101. This is my configuration:
> >
> > ial-peer voice 10 pots
> > destination-pattern 5551313
> > port 2/0
> > !
> > dial-peer voice 20 pots
> > destination-pattern 5552323
> > port 2/1
> >
> > !
> > dial-peer voice 40 voip
> > destination-pattern 5281101
> > session target ipv4:220.20.3.192
> > !
> >
> > voice-port 2/1
> > translate called 32
> >
> > translation-rule 32
> > Rule 0 95281101 5281101
> >
> >
> > but when i start introducing the called number (95281101), i introduce
> > number 9, and because there is no dial-peer with a destination-pattern
> > starting with 9, the router doesn't accept any more numbers.
> >
> > Could somebody tell me what i'm missing, please?
> >
> > Thanks a lot
> >
> > _________________________________________________________________
> > Correos mas divertidos con fotos y textos incrembles en MSN 8. Pruibalo
> > gratis dos meses. http://join.msn.com/?pgmarket=es-es&XAPID=45&DI=1055
> >
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:44 GMT-3