From: Scott Morris (swm@emanon.com)
Date: Tue Apr 06 2004 - 16:37:18 GMT-3
Actually, there's less than 30 pins to really worry about.. But still a
pain!
If you only have DTE cables, you could find some cheap DSU's and connect
them with a T-1 crossover cable (flip 1-2 and 4-5 pairs) and it'll work
wonders!
However, if you don't have those lying around, getting back to back db60's
really isn't all that expensive these days!
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Sam
Munzani
Sent: Tuesday, April 06, 2004 1:48 PM
To: Jay Greenberg; ccielab@groupstudy.com; cisco@groupstudy.com
Subject: Re: Back to Back Serial Cables
If you have old V.35 DCE & DTE cable types, connect them back to back and
you got the answer. splicing 2 V.35 DTE cables will be time consuming and
unreliable as there are 60 pins you need to mess with.
Sam
> Does anyone know how to make a back-to-back serial cables using old
> V.35
> -> DB60 cables by splicing them together ? (or if it's even possible)
>
> Thanks!
>
> --
> Jay Greenberg, CCIE #11021
>
> ______________________________________________________________________
> _ Please help support GroupStudy by purchasing your study materials
> from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:43 GMT-3