From: Lee Donald (Lee.Donald@bacs.co.uk)
Date: Mon Apr 05 2004 - 07:36:42 GMT-3
Unfortunately Mark I don't have Cisco partner access in order to logon to this link, but thanks for trying anyway.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Mark Rushby
Sent: 05 April 2004 11:23
To: ccielab@groupstudy.com
Subject: RE: ISDN Pap problem IE lab 1
Oops
http://www.cisco.com/en/US/partner/tech/tk713/tk507/technologies_tech_no
te09186a0080093c6f.shtml#user_pass
-----Original Message-----
From: Mark Rushby
Sent: 05 April 2004 11:22
To: ccielab@groupstudy.com
Subject: RE: ISDN Pap problem IE lab 1
Check out this link
-----Original Message-----
From: Sam [mailto:samccie2004@yahoo.co.uk]
Sent: 05 April 2004 10:31
To: Lee Donald; ccielab@groupstudy.com
Subject: RE: ISDN Pap problem IE lab 1
only one way to find out !
-----Original Message-----
From: Lee Donald [mailto:Lee.Donald@bacs.co.uk]
Sent: 05 April 2004 11:06
To: samccie2004@yahoo.co.uk; ccielab@groupstudy.com
Subject: RE: ISDN Pap problem IE lab 1
Are you sure ?
I thought global "username and password" entries were for Chap ?
-----Original Message-----
From: Sam [mailto:samccie2004@yahoo.co.uk]
Sent: 05 April 2004 09:50
To: Lee Donald; ccielab@groupstudy.com
Subject: RE: ISDN Pap problem IE lab 1
U set the corresponding username + password on the remote router on
global mode.
R4
Bri0
ppp pap sent etc...R4
****************************************
R5 would expect ur password when u do
R5
username R4 password CISCO
****************************************
CISCO is different from cisco !
Cheers
Sam
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Lee Donald
Sent: 05 April 2004 10:36
To: ccielab@groupstudy.com
Subject: ISDN Pap problem IE lab 1
I'm trying IE lab 1 and at the weekend I could not get the ISDN to work,
it failed on authentication. I'm only using PAP. This is Legacy DDR. The
command to send your logon details was "ppp pap sent-username R5
password cisco", but where is the incoming username & password set ? I
couldn't find it ?
Thanks for any help.
-----------------------------------------------------
You can find us at www.bacs.co.uk
*****************************************************
This communication is confidential and intended for
the exclusive use of the addressee only. You should
not disclose its contents to any other person.
If you are not the intended recipient please notify
the sender named above immediately.
BACS Limited, registered in England, No 1023742,
3 De Havilland Road, Edgware, Middlesex, HA8 5QA
*****************************************************
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:41 GMT-3