From: Marvin Greenlee (marvingreenlee@yahoo.com)
Date: Thu Mar 25 2004 - 15:15:53 GMT-3
The 'Bandwidth percent' functionality has changed a
few times. What IOS version are you using?
--- Danny.Andaluz@triaton-na.com wrote:
> Hello, Group. I am trying to configure the
> following in our production network at work:
>
>
>
> class-map match-all test
>
> match access-group 100
>
> !
>
> policy-map cisco
>
> class test
>
> bandwidth percent 50
>
> !
>
> interface Serial0
>
> no ip address
>
> bandwidth 1536
>
> encapsulation frame-relay
>
> service-policy output cisco
>
> !
>
> interface Serial0.200 point-to-point
>
> ip address xx.xx.xx.xx xx.xx.xx.xx
>
> frame-relay interface-dlci xxx
>
> !
>
> interface Serial0.100 point-to-point
>
> ip address xx.xx.xx.xx xx.xx.xx.xx
>
> frame-relay interface-dlci xxx
>
>
>
>
>
> access-list 100 permit ip any host 148.xx.xx.xx
>
>
>
> My question is what bandwidth does the policy-map
> look at to determine what 50 percent is?
>
>
>
> I know if I placed the policy-map into FRTS
> map-class it would look at the MINCIR, but what
> about in this case? Would it be 75% of 1536
> therefore making 50% 576K?
>
>
>
>
>
> Thanks,
>
> Danny
>
>
__________________________________
Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.
http://taxes.yahoo.com/filing.html
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:47 GMT-3