From: Danny.Andaluz@triaton-na.com
Date: Thu Mar 25 2004 - 16:05:04 GMT-3
Hey Marvin. Here is the output from a show version:
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-I-M), Version 12.2(5d), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 01-Feb-02 23:05 by kellythw
Image text-base: 0x600089A8, data-base: 0x60A56000
ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
AT1-CEL uptime is 14 weeks, 6 days, 34 minutes
System restarted at 13:24:03 EST Fri Dec 12 2003
System image file is "flash:c3640-i-mz.122-5d.bin"
cisco 3640 (R4700) processor (revision 0x00) with 98304K/32768K bytes of memory.
Processor board ID 17065001
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
4 Serial network interface(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
16384K bytes of processor board PCMCIA Slot0 flash (Read/Write)
Configuration register is 0x2102
-----Original Message-----
From: Marvin Greenlee [mailto:marvingreenlee@yahoo.com]
Sent: Thursday, March 25, 2004 1:16 PM
To: Andaluz, Danilo, Triaton/NA
Cc: ccielab@groupstudy.com
Subject: Re: MQC applied to a physical FR interface.
The 'Bandwidth percent' functionality has changed a
few times. What IOS version are you using?
--- Danny.Andaluz@triaton-na.com wrote:
> Hello, Group. I am trying to configure the
> following in our production network at work:
>
>
>
> class-map match-all test
>
> match access-group 100
>
> !
>
> policy-map cisco
>
> class test
>
> bandwidth percent 50
>
> !
>
> interface Serial0
>
> no ip address
>
> bandwidth 1536
>
> encapsulation frame-relay
>
> service-policy output cisco
>
> !
>
> interface Serial0.200 point-to-point
>
> ip address xx.xx.xx.xx xx.xx.xx.xx
>
> frame-relay interface-dlci xxx
>
> !
>
> interface Serial0.100 point-to-point
>
> ip address xx.xx.xx.xx xx.xx.xx.xx
>
> frame-relay interface-dlci xxx
>
>
>
>
>
> access-list 100 permit ip any host 148.xx.xx.xx
>
>
>
> My question is what bandwidth does the policy-map
> look at to determine what 50 percent is?
>
>
>
> I know if I placed the policy-map into FRTS
> map-class it would look at the MINCIR, but what
> about in this case? Would it be 75% of 1536
> therefore making 50% 576K?
>
>
>
>
>
> Thanks,
>
> Danny
>
>
__________________________________
Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.
http://taxes.yahoo.com/filing.html
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:47 GMT-3