From: Robert (k_robert@tsp.lviv.ua)
Date: Sun Feb 01 2004 - 05:08:05 GMT-3
Hi Narayan,
honestly I have never seen a situation where end port is less then start
one. As far as I know in such a situation those 200k that you tried to
reserve for LLQ would go into oblivion, this seems like a ' null bandwidth'.
Second , or I am very much mistaken, you restricted your individual
session bandwidth to 0 ?
Robert
Technical specialist
Kapsch telecom
www.kapsch.net.ua
> Hi
>
> On R4 Frame-relay interface RTP traffic should not cross 200k, and each
> session should not cross 20K
>
> to achieve this,is below config right ?
>
>
>
> ip rtp priority 16384 16383 200
> (prioritise RTP between those ports with 300k reserved for them)
> ip rsvp bandwidth 200 ２0
>
>
> ------------------------------------------
> NARAYAN GAWAS
> Cisco Technical Assistance Center(CiscoTAC)
> ngawas@cisco.com
> -------------------------------------------
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:43 GMT-3