From: Narayan Gawas (ngawas@cisco.com)
Date: Mon Mar 22 2004 - 22:14:06 GMT-3
Hi
What about these command ?
ip rsvp pq-profile voice-like----->voice get prioritised
ip rsvp bandwidth 200 20"
I am bit confuse about how to config below requirement.
Any advise will be higly appreciated
Regards
Narayan
------------------------------------------
NARAYAN GAWAS
Cisco Technical Assistance Center(CiscoTAC)
ngawas@cisco.com
-------------------------------------------
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Narayan Gawas
Sent: Monday, March 22, 2004 9:56 AM
To: ccielab@groupstudy.com
Subject: rsvp
Hi
On R4 Frame-relay interface RTP traffic should not cross 200k, and each
session should not cross 20K
to achieve this,is below config right ?
ip rtp priority 16384 16383 200
(prioritise RTP between those ports with 200k reserved for them) ip rsvp
bandwidth 200 ２0
------------------------------------------
NARAYAN GAWAS
Cisco Technical Assistance Center(CiscoTAC)
ngawas@cisco.com
-------------------------------------------
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:44 GMT-3