From: Richard Dumoulin (richard.dumoulin@vanco.es)
Date: Fri Mar 19 2004 - 10:16:21 GMT-3
Yes new. This command was not supported on the 3550. Now I don't know,
--Richard
-----Mensaje original-----
De: Wes Smith [mailto:wesmith@rogers.com]
Enviado el: viernes, 19 de marzo de 2004 14:01
CC: ccielab@groupstudy.com
Asunto: Re: Confirmation on my understanding of WCCP
Yes .. you are correct. You put the redirect out on the interface
leading to the internet or servers that you want to cache for.
The cache could also be on E0 ... or some other interface.
In fact .. the use of 'redirect in' is new for 12.2.
Ng, Kim Seng David (David) wrote:
>Hello group,
>
>I just would like to confirm my understanding on the "ip wccp redirect OUT"
command. Gone through the grpstudy archives, doc cd and cisco.com but just
to make sure I get it right. I had no problems understanding the other
"redirect in" cmd though. Anyway, I have taken the following config example
from doc CD:
>
>"Running a Web Cache Service Example
>The following example shows a web cache service configuration session:
>
>router# configure terminal
>router(config)# ip wccp web-cache
>router(config)# interface ethernet 0
>router(config-if)# ip wccp web-cache redirect out "
>
>My understanding from the above config is that any http request outgoing
from interface e0 will be re-directed to some other interfaces where the
web-cache is residing. Interface e0 would likely be a connection to the
internet or where a web server is located. Interface e0 will not be where
the web-cache is located.
>
>Is my understanding correct?
>
>Thanks in advance
>David
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:36 GMT-3