From: Calton, Doug (Doug.Calton@getronics.com)
Date: Wed Mar 10 2004 - 23:41:44 GMT-3
2500 series doesn't support multiple HSRP groups. 2600 and above will.
One of about three reasons I want to GET THIS OVER WITH so I can retire
my fast-becoming-obsolete home lab. Sorry!
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Mark Rushby
Sent: Wednesday, March 10, 2004 3:50 PM
To: ccielab@groupstudy.com
Subject: HSRP
Hi All
I am trying to config 2 HSRP standby groups on the same interface (E0).
And i'm getting the following error message: Any ideas?
% Interface hardware cannot support multiple groups
R6#sh vers
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JS-L), Version 12.2(7a), RELEASE SOFTWARE
(fc2) Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Thu
21-Feb-02 01:22 by pwade Image text-base: 0x03079498, data-base:
0x00001000
ROM: System Bootstrap, Version 11.0(10c)XB2, PLATFORM SPECIFIC RELEASE
SOFTWARE
(fc1)
BOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB2,
PLATFORM SP ECIFIC RELEASE SOFTWARE (fc1) R6 uptime is 6 minutes System
returned to ROM by reload System image file is
"flash:c2500-js-l.122-7a.bin" cisco 2500 (68030) processor (revision D)
with 16384K/2048K bytes of memory. Processor board ID 02234200, with
hardware revision 00000000 Bridging software. X.25 software, Version
3.0.0. SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software. 2 Ethernet/IEEE 802.3 interface(s) 2 Serial
network interface(s) 32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY) Configuration
register is 0x2102
TIA
Mark
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:17 GMT-3