From: Gregory W. Posey Jr. (gposey@uaes.org)
Date: Tue Mar 09 2004 - 11:23:06 GMT-3
The "autocommand" timeout is an idle timeout. The "access-list 101
dynamic timeout" is absolute - so if they HAVE TO AUTHENTICATE every 10
minutes, I would think they want you to use the absolute.
Thank you,
Greg Posey Jr.
CCIE #7981
CCSP, CCSE
M.S. EE
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
David Hurtado
Sent: Monday, March 08, 2004 2:30 PM
To: ccielab@groupstudy.com
Subject: Dynamic ACL timeout
If you are asked to use Dynaminc ACL, ensuring that the user must
authenticate every 10 minutes, where do you establish the timeout of 10
minutes:
access-list 101 dynamic dinamico timeout 10 permit ip any any
or in:
autocommand access-enable timeout 10
Probably both are valid, but i would like to be sure.
Thanks a lot for the help
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:16 GMT-3