From: Shibu Nair (shinair@cisco.com)
Date: Mon Mar 08 2004 - 02:02:06 GMT-3
Hi there,
R2 is the multipoint frame relay hub router. R3 is the spoke router
configured as point to point frame-relay (dlci).
So far so good.. I can ping between R2 and R3.
When i configured OSPF on this setup I have configured point-to-multipoint
on the hub router (R2). And point to
point OSPF type on the spoke router (r3). By default since the ospf network
types are not matching and hence
neighborship will not form between R2 and R3. Now without changing the
network types, I have changed the
timers on the spoke router to match the hub router.
Now i can see the neighborship is formed and routes are exchanged. OSPF
network types are different though.
Hub is point-to-multipoint and spoke is point to point OSPF network types,
all i did is to match the hello/dead intervels
between these routers.
My question, Anything wrong iam doing here... ?
Thank you
Regards
Shibu
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:16 GMT-3