From: alsontra@hotmail.com
Date: Sat Feb 28 2004 - 20:13:13 GMT-3
Group,
Topology is simply, R2 is the hub, R1 and R3 are spokes. The spoke routers are
configured on p2p subifs with ip ospf network type broadcast specified.
Network type is non_broadcast on R2's multi-point physical interface. R2 has
neighbor statements pointing toward the hubs, so R1and R3 become adjacent with
R2. My question is this is a follows: When I do a debug ip ospf hello on the
hubs, why is the destination of the hello packets 0.0.0.6? I understand that
the network type is non_broadcast and hello packets are replicated as unicasts
to the Hub router, but what is this 0.0.0.6 address? Is it irrelevant?
debug ip ospf hello
<output on R3, makes no since to me>
*Mar 1 01:12:31.907: OSPF: Send hello to 0.0.0.6 area 0 on Serial1/0.1 from
141.1.123.3
Alsontra
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:59 GMT-3