From: alsontra@hotmail.com
Date: Thu Feb 26 2004 - 20:58:21 GMT-3
ok, so I miss-configured the interface, but that's no reason to get indignant!
R4 is going to get a much needed spanking!
Quote from R4 during an RSVP configuration:
R4(config-if)#ip rsvp bandwidth 128000 64
RSVP bandwidth (which is the bandwidth for the IP
headers and data inside them, but not the required
link layer headers) exceeds 75% of interface bandwidth.
It may be that you need to enter the 'bandwidth'
command to correct the system's understanding of the
available bandwidth. If that's not the case, then:
Due to bit-stuffing, layer 2 headers and layer 1
framing, and the need for routing and keep-alive
traffic, not to mention the RSVP messages themselves,
this is just plain too high. Configure your interface
realistically for the bandwidth available.
Alsontra
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:57 GMT-3