From: Yasser Aly (blackyeyes00@hotmail.com)
Date: Wed Feb 25 2004 - 22:35:57 GMT-3
Hello,
You have voice port 1/1/0 & port 1/1/1 and asked to configure redundancy
per dial peer ( thats to say configure the same destination pattern on
different voice ports ).
Required to provide redundancy for 3333 such that it use port 1/10 mainly,
but if not available or busy use port 1/1/1
Dial-peer voice 1 pots
Destination-pattern 3333
Port 1/1/0
!
Dial-peer voice 2 pots
Destination-pattern 4444
port 1/1/1
!
Dial-peer voice 3 pots
Destination-pattern 3333
Port 1/1/1
Is it enough to do this relying that dial-peers are check from lower to
higher order or the
prefernce command needs to be used under the main dial-peer ??
Preference 1 < dial-peer > 1 will be prefered to answer the call unless its
busy >
Regards,
Yasser
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:57 GMT-3