From: Alec (clapun@graduate.hku.hk)
Date: Mon Feb 16 2004 - 12:42:58 GMT-3
according to the matrix, seems Ethernet to Ethernet is supported on 12.0
----- Original Message -----
From: "Thomas Larus" <tlarus@cox.net>
To: "Jonathan Hays" <nomad@gfoyle.org>; "'Yasser Abdullah '"
<yasser@alharbitelecom.com>; "'Pun, Alec CL'" <Alec.CL.Pun@pccw.com>;
<ccielab@groupstudy.com>
Sent: Monday, February 16, 2004 8:33 PM
Subject: Re: DLSW FST encapsulation
> And here is a link to a Cisco DLSW+ Support Matrix Document (need cust
> login):
>
>
http://www.cisco.com/en/US/customer/products/sw/iworksw/ps2474/prod_technical_reference09186a008011a67f.html
>
>
>
> Tom Larus, CCIE #10,014
> Author of CCIE Warm-Up: Advice and Learning Labs
>
>
>
> ----- Original Message -----
> From: "Jonathan Hays" <nomad@gfoyle.org>
> To: "'Yasser Abdullah '" <yasser@alharbitelecom.com>; "'Pun, Alec CL'"
> <Alec.CL.Pun@pccw.com>; <ccielab@groupstudy.com>
> Sent: Tuesday, March 16, 2004 7:05 AM
> Subject: RE: DLSW FST encapsulation
>
>
> > According to Cisco, "Fast-Sequenced Transport (FST) encapsulation is
> > supported over almost every type of LAN or WAN."
> >
> > http://www.cisco.com/warp/public/100/trb_rif.html
> >
> >
> > >-----Original Message-----
> > >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> > >Behalf Of Yasser Abdullah
> > >Sent: Monday, February 16, 2004 3:55 AM
> > >To: 'Pun, Alec CL'; ccielab@groupstudy.com
> > >Subject: RE: DLSW FST encapsulation
> > >
> > >
> > >FST works on Token rings only.
> > >
> > >Yasser
> > >
> > >-----Original Message-----
> > >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > >Pun, Alec CL
> > >Sent: Monday, February 16, 2004 6:36 AM
> > >To: Michael Snyder; ccielab@groupstudy.com
> > >Cc: 'asadovnikov'
> > >Subject: DLSW FST encapsulation
> > >
> > >Have anyone tried to use FST on Ethernet ? I just setup two routers
> > >running
> > >FST encapsulation back-to-back but it did not bridge ethernet packets
> > >thru..... Peers are up but when I try to ping from PC-A to PC-B, no
> > >packets
> > >received. Any help is appreciated.
> > >
> > >PC-A ----- 1710A ----- DLSW (FST) -------- 1710B --------- PC-B
> > >
> > >1710A & B configuration is similar
> > >
> > >bridge irb
> > >bridge 1 protocol ieee
> > >dlsw local-peer peeri-d 1.1.1.1
> > >dlsw remote-peer 0 fst 1.1.1.2
> > >dlsw bridge 1
> > >
> > >int e1
> > > ip addr 1.1.1.1
> > >!
> > >int e0
> > > description To_PC
> > > no ip addr
> > > bridge-group 1
> > >!
> > >
> > >rgds,
> > >alec
> > >
> > >_______________________________________________________________________
> > >Please help support GroupStudy by purchasing your study materials from:
> > >http://shop.groupstudy.com
> > >
> > >Subscription information may be found at:
> > >http://www.groupstudy.com/list/CCIELab.html
> > >
> > >_______________________________________________________________________
> > >Please help support GroupStudy by purchasing your study materials from:
> > >http://shop.groupstudy.com
> > >
> > >Subscription information may be found at:
> > >http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:50 GMT-3