From: Bill Lijewski (bill@eccie.com)
Date: Thu Feb 12 2004 - 22:52:35 GMT-3
Just like the 'no-summary' command for a Totally Stubby area or a
Totally NSSA area, the 'default-information-originate' command should
only go on the ABR.
- Bill Lijewski
CCIE#8642
Network Learning Inc
5 Day R&S CCIE Bootcamp Instructor
bill@eccie.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Paul Chen
Sent: Friday, February 13, 2004 12:14 AM
To: ccielab@groupstudy.com
Subject: NSSA [bcc][faked-from]
Importance: Low
Hi,
If it says Rx must have a default route for a NSSA area :
cat3550------ a ospf network
|
|
Rx
|
Other routing protols
Do I configure area x nssa default-information originate on both sides
or
just on Rx ?
I did it on both the cat 3550 and Rx . Rx will still have a default
route
pointing to the Cat3550.
Does it matter which side to configure the nssa default-info-originate
on ?
Any advice appreciated.
Paul
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:49 GMT-3