From: Packet Man (ccie2b@hotmail.com)
Date: Thu Feb 12 2004 - 21:17:44 GMT-3
Can you explain why that would work? What difference would it make if the
router ID is the same as vlan A or something else as long as it's unique?
Thanks
>From: "Guilherme Correia" <razzolini80@hotmail.com>
>Reply-To: "Guilherme Correia" <razzolini80@hotmail.com>
>To: ccielab@groupstudy.com
>Subject: RE: OSPF Adjancies
>Date: Thu, 12 Feb 2004 23:55:21 +0000
>
>I would make the ospf router-id on the cat 137.10.125.10...the same IP
>address as the vlanA ..
>
>
>HTH
>
>
>From: "Charles T. Alexander" <charles.t.alexander@verizon.net>
>Reply-To: "Charles T. Alexander" <charles.t.alexander@verizon.net>
>To: <ccielab@groupstudy.com>
>Subject: OSPF Adjancies
>Date: Thu, 12 Feb 2004 17:32:05 -0500
>
>I am having problems forming ospf neighbors on the catayst below for Vlan
>125. I have also attached one of the routers which is trying to get
>adjacencies.
>
>-----------------------------------------------------------
>cat#r
>Building configuration...
>
>Current configuration : 6055 bytes
>!
>version 12.1
>no service pad
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname cat
>!
>logging buffered 10000 debugging
>enable password radnor
>!
>username Tess privilege 15 password 0 Abbott
>ip subnet-zero
>ip routing
>no ip domain-lookup
>ip domain-name ctasys.net
>!
>!
>!
>key chain chucko3
> key 1
> key-string ctasta3
>key chain chucko50
> key 1
> key-string ctasta50
>key chain cta_vlanc
> key 1
> key-string cta_vlanc
>spanning-tree extend system-id
>system mtu 1518
>!
>!
>!
>interface Loopback0
> ip address 137.10.10.1 255.255.255.0
> ip ospf network point-to-point
>!
>interface Loopback1
> ip address 137.10.20.1 255.255.255.0
>!
>interface Port-channel1
> switchport trunk encapsulation dot1q
> switchport mode trunk
> no ip address
>!
>interface FastEthernet0/1
> switchport access vlan 125
> no ip address
>!
>interface FastEthernet0/2
> switchport access vlan 125
> no ip address
>!
>interface FastEthernet0/3
> no ip address
>!
>interface FastEthernet0/4
> switchport access vlan 74
> no ip address
>!
>interface FastEthernet0/5
> switchport access vlan 50
> no ip address
> storm-control broadcast level 0.00
>!
>interface FastEthernet0/6
> switchport access vlan 74
> no ip address
>!
>interface FastEthernet0/7
> switchport access vlan 74
> no ip address
>!
>interface FastEthernet0/8
> switchport access vlan 98
> no ip address
>!
>interface FastEthernet0/9
> switchport access vlan 98
> no ip address
>!
>interface FastEthernet0/10
> no ip address
>!
>interface FastEthernet0/11
> switchport access vlan 125
> no ip address
>!
>interface FastEthernet0/12
> switchport access vlan 98
> no ip address
>!
>interface FastEthernet0/13
> switchport access vlan 192
> no ip address
>!
>interface FastEthernet0/14
> switchport access vlan 74
> no ip address
>!
>interface FastEthernet0/15
> switchport access vlan 74
> no ip address
>!
>interface FastEthernet0/16
> switchport access vlan 125
> no ip address
>!
>interface FastEthernet0/17
> switchport access vlan 200
> no ip address
> no keepalive
>!
>interface FastEthernet0/18
> description test port cta
> bandwidth 10000
> no ip address
> speed 10
>!
>interface FastEthernet0/19
> switchport access vlan 100
> no ip address
>!
>interface FastEthernet0/20
> no ip address
>!
>interface FastEthernet0/21
> no ip address
>!
>interface FastEthernet0/22
> no ip address
>!
>interface FastEthernet0/23
> switchport trunk encapsulation dot1q
> switchport trunk allowed vlan 1,50,74,98,100,125,192,200,1002-1005
> switchport mode trunk
> no ip address
> channel-group 1 mode desirable
>!
>interface FastEthernet0/24
> switchport trunk encapsulation dot1q
> switchport trunk allowed vlan 1,50,74,98,100,125,192,200,1002-1005
> switchport mode trunk
> no ip address
> channel-group 1 mode desirable
>!
>interface GigabitEthernet0/1
> no ip address
>!
>interface GigabitEthernet0/2
> no ip address
>!
>interface Vlan1
> no ip address
>!
>interface Vlan50
> description Vlan B
> ip address 137.10.50.10 255.255.255.0
> ip rip authentication mode md5
> ip rip authentication key-chain chucko50
>!
>interface Vlan74
> description Vlan C
> ip address 137.10.74.10 255.255.255.192
> ip helper-address 137.10.200.1
> ip authentication mode eigrp 100 md5
> ip authentication key-chain eigrp 100 cta_vlanc
>!
>interface Vlan125
> description Vlan A
> ip address 137.10.125.10 255.255.255.0
> ip ospf hello-interval 1
>!
>interface Vlan192
> description Vlan E
> ip address 192.168.30.10 255.255.255.0
> no ip unreachables
> ip rip authentication mode md5
> ip rip authentication key-chain chucko3
>!
>interface Vlan200
> description Vlan F
> ip address 137.10.200.10 255.255.255.192
>!
>router eigrp 100
> redistribute ospf 1 metric 10000 1000 255 1 1500
> redistribute rip metric 10000 1000 255 1 1500
> network 137.10.74.0 0.0.0.63
> no auto-summary
> no eigrp log-neighbor-changes
>!
>router ospf 1
> router-id 137.10.10.1
> log-adjacency-changes detail
> timers spf 0 0
> redistribute eigrp 100 metric-type 1 subnets
> redistribute rip metric-type 1 subnets
> network 137.10.10.0 0.0.0.255 area 0
> network 137.10.125.0 0.0.0.255 area 0
> distance 171
> distance 110 0.0.0.0 255.255.255.255 2
>!
>router rip
> version 2
> timers basic 40 120 180 240
> redistribute eigrp 100 metric 1
> redistribute ospf 1 metric 1
> passive-interface default
> no passive-interface Vlan50
> no passive-interface Vlan192
> no passive-interface Vlan200
> network 137.10.0.0
> network 192.168.30.0
> default-information originate route-map def-to-bb3
> distribute-list prefix just27 in Vlan192
> distance 171
> distance 169 137.10.50.10 0.0.0.0 5
> distance 169 137.10.50.5 0.0.0.0 5
> no auto-summary
>!
>ip classless
>ip http server
>ip http authentication local
>!
>ip access-list standard def-bb3
> permit 137.10.50.0 0.0.0.255
> permit 137.10.74.0 0.0.0.63
> permit 137.10.200.0 0.0.0.63
> permit 137.10.125.0 0.0.0.255
>!
>!
>!
>ip prefix-list just27 seq 5 permit 192.178.0.0/16 ge 27
>!
>logging 137.10.125.101
>access-list 2 permit 137.10.2.0 0.0.0.255
>access-list 2 permit 137.10.1.0 0.0.0.255
>access-list 2 permit 137.10.25.0 0.0.0.3
>access-list 2 permit 192.176.0.0 0.0.3.0
>access-list 5 permit 137.10.2.0 0.0.0.255
>access-list 5 permit 137.10.1.0 0.0.0.255
>access-list 5 permit 137.10.5.0 0.0.0.255
>access-list 5 permit 137.10.10.0 0.0.0.255
>access-list 5 permit 137.10.25.0 0.0.0.3
>access-list 5 permit 137.10.125.0 0.0.0.255
>access-list 5 permit 137.10.45.0 0.0.0.15
>access-list 5 permit 192.176.0.0 0.0.3.0
>access-list 5 permit 205.1.1.0 0.0.0.127
>arp 137.10.50.5 00e0.1ef8.0961 ARPA
>route-map def-to-bb3 permit 10
> match ip address def-bb3
> set interface Vlan192
>!
>snmp-server engineID local 800000090300000BBE9D5301
>snmp-server location Bryn Mawr
>snmp-server contact Charlie
>alias exec r show run
>alias exec c config t
>alias exec i show ip route
>alias exec bs show ip bgp summary
>alias exec u undebug all
>alias exec w write
>alias exec b show ip bgp
>alias exec s show ip int brief
>!
>line con 0
> exec-timeout 0 0
> logging synchronous
> escape-character 27
>line vty 0 4
> exec-timeout 0 0
> password bp
> login
>line vty 5 15
> exec-timeout 0 0
> password bp
> login
>!
>!
>monitor session 1 source vlan 125 rx
>monitor session 1 destination remote vlan 100 reflector-port Fa0/23
>end
>
>cat#
>
>----------------------------------------------------------
>r2#r
>Building configuration...
>
>Current configuration : 2566 bytes
>!
>version 12.2
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname r2
>!
>boot system tftp r2-ios-image 137.10.74.62
>logging buffered 10000 debugging
>enable password radnor
>!
>username r5 password 0 ctasta
>ip subnet-zero
>no ip domain-lookup
>ip host r1 137.10.125.1
>!
>isdn switch-type basic-ni
>!
>!
>!
>interface Loopback0
> ip address 137.10.2.2 255.255.255.0
> ip router isis
>!
>interface Ethernet0
> backup delay 5 60
> backup interface BRI0
> ip address 137.10.125.2 255.255.255.0
> ip ospf hello-interval 1
> ip ospf priority 0
>!
>interface Serial0
> ip address 137.10.100.2 255.255.255.224
> ip router isis
> encapsulation frame-relay
> frame-relay map clns 104 broadcast
> frame-relay map ip 137.10.100.2 104
> frame-relay map ip 137.10.100.4 104 broadcast
> frame-relay map ip 137.10.100.6 104 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type ansi
>!
>interface Serial1
> no ip address
> shutdown
>!
>interface BRI0
> ip address 137.10.25.2 255.255.255.252
> encapsulation ppp
> dialer map ip 137.10.25.1 name r5 broadcast 4082222222
> dialer load-threshold 99 either
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 40811111111
> isdn spid2 40811111112
> no peer neighbor-route
> no cdp enable
> ppp authentication chap callin
> ppp multilink
> hold-queue 25 in
>!
>router ospf 1
> router-id 137.10.2.2
> log-adjacency-changes
> timers lsa-group-pacing 600
> redistribute connected metric 10 subnets route-map c2o
> redistribute isis level-2 subnets
> network 137.10.25.0 0.0.0.3 area 1
> network 137.10.125.0 0.0.0.255 area 0
>!
>router isis
> redistribute ospf 1
> distance 109 137.10.1.1 0.0.0.0 2
> net 49.0102.2222.2222.2222.00
> is-type level-2-only
>!
>ip classless
>ip http server
>ip ospf name-lookup
>ip pim bidir-enable
>!
>access-list 1 permit 137.10.2.0
>access-list 1 permit 137.10.100.0 0.0.0.31
>access-list 2 permit 137.10.6.0
>access-list 2 permit 137.10.5.0
>access-list 2 permit 137.10.45.0 0.0.0.15
>access-list 2 permit 205.1.1.0 0.0.0.127
>access-list 101 permit icmp any any
>access-list 101 permit ip any host 137.10.125.10
>access-list 101 permit tcp any any eq bgp
>access-list 101 permit ospf any any
>dialer-list 1 protocol ip list 101
>route-map c2o permit 10
> match ip address 1
>!
>!
>alias exec i show ip route
>alias exec r show run
>alias exec c config t
>alias exec u undebug all
>alias exec b show ip bgp
>alias exec bs show ip bgp sum
>alias exec s show ip int brief
>alias exec w write
>!
>line con 0
> exec-timeout 0 0
> logging synchronous
> escape-character 27
>line aux 0
>line vty 0 4
> exec-timeout 0 0
> password bp
> login
>!
>end
>
>r2#
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>_________________________________________________________________
>Help STOP SPAM with the new MSN 8 and get 2 months FREE*
>http://join.msn.com/?page=dept/bcomm&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:49 GMT-3