From: Michael Snyder (msnyder@revolutioncomputer.com)
Date: Mon Feb 09 2004 - 22:07:49 GMT-3
http://www.cisco.com/en/US/tech/tk365/tk480/technologies_tech_note09186a
008009405a.shtml
Can you elaborate on this a little more:
"One more thing, there's a special case where in ospf where if you don't
passive a non-neighbored interface it will break the route. Save
yourself some trouble, if your ospf interface doesn't have a neighbor;
passive it and move on. I spend two hours once trying to figure that
one out."
I don't understand what you mean by "break the route".
Thanks,
Danny
------------------------------------------------------------------
http://www.cisco.com/en/US/tech/tk365/tk480/technologies_tech_note09186a
008009405a.shtml
Common Routing Problem with OSPF Forwarding Address
Like I said, it's a special case.
OSPF is enabled on the ASBR's next hop interface AND
ASBR's next hop interface is non-passive under OSPF AND
ASBR's next hop interface is not point-to-point AND
ASBR's next hop interface is not point-to-multipoint AND
ASBR's next hop interface address falls under the network range
specified in the router ospf command.
The easy fix being to passive any interface that doesn't have a
neighbor.
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:48 GMT-3