Fall-Back Bridging

From: iwan (iwan@i-lusion.nl)
Date: Wed Feb 04 2004 - 20:30:22 GMT-3

• Next message: Shibu Nair: "RIP and route-map - subtract the metric value"
• Previous message: Scott Morris: "RE: Appletalk over PPP Multilink Bundle"
• Next in thread: K. Tahsin Hersan: "RE: Fall-Back Bridging"
• Maybe reply: K. Tahsin Hersan: "RE: Fall-Back Bridging"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

Does anybody know what Fall-Back Bridging is?

I try to understand is ...but i dont quit know how I need to interpret
this...

What is Fall-Back Bridging?
And how do you configure is?

I ran on to this when i was configureing DLSW+

NETBIOS_HOST1------>CAT1------>R1------>R2------>CAT2------>NETBIOS_HOST2
                        VLAN1
VLAN2

I made a DLSW peering between NETBIOS_HOST1 and NETBIOS_HOST2 both
NETBIOS_HOSTS are connected to a different switch and a diffferent VLAN...

in the explanation of the task they told me to use Fall-Back Bridging ...
But I don't know how ...

Thanks

Iwan

• Next message: Shibu Nair: "RIP and route-map - subtract the metric value"
• Previous message: Scott Morris: "RE: Appletalk over PPP Multilink Bundle"
• Next in thread: K. Tahsin Hersan: "RE: Fall-Back Bridging"
• Maybe reply: K. Tahsin Hersan: "RE: Fall-Back Bridging"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:46 GMT-3