From: Richard Davidson (rich@myhomemail.net)
Date: Sat Jan 31 2004 - 13:57:43 GMT-3
Why is CBR or VBR-RT not avalable? Is this a spceial
feature that is not avalable on all IOSs?
This is the bradshawlabs r9.
r6(config)#int atm 0.1
r6(config-subif)#pvc 0/113
r6(config-if-atm-vc)#?
ATM virtual circuit configuration commands:
atm atm pvc commands
broadcast Pseudo-broadcast
class-vc Configure default vc-class name
default Set a command to its defaults
dialer set dialer pool this pvc belongs to
encapsulation Select ATM Encapsulation for VC
exit-vc Exit from ATM VC configuration mode
ilmi Configure ILMI management
inarp Change the inverse arp timer on the
PVC
no Negate a command or set its defaults
oam Configure oam parameters
oam-pvc Send oam cells on this pvc
protocol Map an upper layer protocol to this
connection.
ubr Enter Unspecified Peak Cell Rate
(pcr) in Kbps.
ubr+ Enter Peak Cell Rate(pcr)Minimum Cell
Rate(mcr) in Kbps.
vbr-nrt Enter Variable Bit Rate
(pcr)(scr)(bcs)
*******
Cisco Internetwork Operating System Software
IOS (tm) 4500 Software (C4500-JS-M), Version
12.2(17a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 19-Jun-03 11:45 by pwade
Image text-base: 0x60008948, data-base: 0x61002000
=====
Richard Davidson
Yahoo IM: r1davidson
e-mail rich@myhomemail.net
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:52 GMT-3