From: paul (paul_hwang@hanmail.net)
Date: Tue Jan 27 2004 - 13:28:35 GMT-3
HI all,
could I make a few questions regarding the ip multicast on the Cat6500.
Q.1) what are difference between Anycast-RP and Auto-rp?
Anycast means what?
Q.2) And what is the MSDP, it's the same thing with the anycast rp?
Q.3) when we configure for the auto-rp in PIM-SM, it requires the below
commands.
- why we use the "ip pim sparse-dense-mode" though we want to run the
PIM-SM with auto-rp?
- do we have to put the "ip pim accept-rp auto-rp" as well?
!
ip multicast-routing
!
interface eth0
ip address 12.53.10.2 255.255.255.0
ip pim sparse-dense-mode <===== why sparce-dense though we configure just
sparse-mode for the static RP.
!
ip pim accept-rp auto-rp <===== does it really need?
ip pim send-rp-announce
ip pim send-rp-discovery
!
Thanks for your comment.
Paul.
"?l8. @NEM3], Daum" http://www.daum.net !:Fr;}>24B 9+7a GQ8^@O3]!;
[IMAGE]
GA8.9L>v 8^@O =a:8<L>n?d?
:|8% @|<[,Fm8.GQ 1b4I@G 3*88@G 0mG00] 8BCc 8^@O!
[IMAGE]
[IMAGE]
[IMAGE]
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:51 GMT-3